Off-peak import
Units you bought from the grid outside peak hours. Usually the largest number on the bill.
Pakistan · Green Meter
Your solar meter shows three numbers and your bill shows three more. This page explains what registers #8, #6 and #5 mean, how to turn them into the units you actually used this cycle, and what changed when NEPRA moved new prosumers onto net billing in February 2026.
Step one
Press the scroll button on the meter until the register number appears in the small corner display. Each figure is a lifetime running total, not a monthly one.
Units you bought from the grid outside peak hours. Usually the largest number on the bill.
Units bought during peak hours, charged at the higher time-of-use rate.
Units your panels sent back to the grid. This is what earns you credit.
Not sure which button cycles the display? Read the full meter-reading guide.
Step two
For each register: present meter reading − reading on your last bill. Then net the three results and add anything carried forward.
| Register | Meter now | On last bill | This cycle |
|---|---|---|---|
| #8 Off-peak import | 12,480 | 12,180 | −300 |
| #6 Peak import | 3,120 | 3,040 | −80 |
| #5 Off-peak export | 9,640 | 9,000 | +640 |
| Previous surplus | - | - | +60 |
| Net surplus | - | +320 kWh | |
640 exported − (300 + 80) imported + 60 carried forward = 320 kWh in credit. If your utility applies an export deduction percentage, enter it in the calculator and it comes off the export figure before the netting.
Run your own numbersThe 2026 change
If you held a valid net-metering agreement on 9 February 2026, your old terms continue until that agreement expires. Exports and imports still net 1:1, so a single unit price values the whole balance.
In the calculator: choose Net metering and enter your retail tariff as the unit price.
Applications after the cut-off fall under NEPRA’s Prosumer Regulations 2026. You buy at the retail tariff and sell exports at a separate, lower buyback rate, and permitted system size is tied to your sanctioned load.
In the calculator: choose Net billing and enter your off-peak, peak and buyback rates. It prices imports and exports separately and shows your estimated bill.
Buyback rates are set by regulatory determination and have already moved more than once, so we do not print a figure that might be out of date - confirm yours with your DISCO or NEPRA. The full breakdown of what changed .
Coverage
Register numbering and the subtraction method are the same nationwide. Pick your company for a calculator and guide written for its customers, or اردو میں کیلکولیٹر.
Questions
A green meter is the bidirectional net meter your DISCO installs when your rooftop solar is approved. It counts electricity in both directions - what you take from the grid and what you send back - on separate registers. "Green meter", "net meter" and "netmeter" all mean the same device.
Press the meter’s scroll button until the register number appears in the small corner display. #8 is off-peak import, #6 is peak import and #5 is off-peak export. Each is a lifetime running total, so subtract the matching figure printed on your last bill to get this cycle’s units.
For every register, take the present meter reading minus the reading on your last bill. Add off-peak and peak imports together, subtract that total from your export units, then add any surplus carried forward. A positive answer is credit; a negative one is what you will be billed for. This calculator does all of it as you type.
For new applicants, yes. NEPRA’s Prosumer Regulations 2026, notified on 9 February 2026, replaced net metering with net billing: imports are bought at the retail tariff and exports are sold back at a separate, lower rate rather than netted 1:1. Consumers holding a valid net-metering agreement on that date continue on the old terms until their agreement expires.
Yes. Switch the calculator to “Net billing” and enter your off-peak, peak and buyback rates. The registers and the unit arithmetic are unchanged; the calculator prices imports and exports separately and shows how much more the same exports would have earned under 1:1 net metering.
The regulations tie permitted capacity to your sanctioned load, where the earlier framework was more generous. Confirm your sanctioned load on your bill and check the current limit with your DISCO before ordering a system.
It is set by regulatory determination and has moved more than once, with figures reported inconsistently while the rules were being finalised. We deliberately do not print a number here that could be stale. Ask your DISCO in writing, or check NEPRA’s notified determination, and enter that figure as the buyback rate in the calculator’s net billing mode.
Enter your three registers and see your net position before the bill arrives.